Jump to content

ktloah

Members
 View Profile  See their activity

  • Posts

    221

  • Joined

  • Last visited

 Content Type 

Everything posted by ktloah

  1. ktloah
    I would check to see if fan speed is adjustable as Frank has posted. The new 10 button thermostats should have this...if it was working fine before you swapped out units, then I would start there first...good luck
  2. ktloah
    My friend replace his bilsteins with konis in the front and ended up returning them...too stiff a ride he said...97 Monaco Windsor...Bilsteins are good for 100k..
  3. ktloah
    And a Happy Thanksgiving to you and all. Be well
  4. ktloah
    Agree totally with Ivan and Pdugg's comments. After weighing my 04 Dynasty, I run 115 front, 95 drives, and 85 tag....rides well, handles well too.
  5. ktloah
    Exactly what Ray says, there is a labeled dip sw.
  6. ktloah
    We ordered thru an RV dealer...4 weeks and we had it
  7. ktloah
    We used Majors RV in Bourne, MA. Great people to work with
  8. ktloah
    Our front A/C unit on our 04 Dynasty quit and we ordered a new 15k BTU low profile Dometic from a local RV shop. 4 weeks later we had it...there is some delay due to the pandemic they say...
  9. ktloah
    One of the best HD motors
  10. ktloah
    Mine was so old and the rubber was iil soaked. Bought a new 1" easy-grip and replaced it. Just unscrew the old one off, it may be hard to get past the stops they use to prevent the dipstick from falling off. Screw on the new and take a chisel to spread the threads so it doesn't unscrew. Easy job, and a whole lot cheaper than trying to find a new dipstick
  11. ktloah
    Had similar problem and turn out to be the ignition coil. Bought one thru John Carillo and haven't had any problems since
  12. ktloah
    If I'm not mistaken, my 04 Dynasty rides on 10 air bags
  13. ktloah
    Just have someone put a bead of weld on it. They can tell when they weld if there is enough "meat " to weld it.
  14. ktloah
    Had the same problem with my 04 Dynasty, removed sensor on expansion tank, and replaced mine. Threads were severely corroded. Works great
  15. ktloah
    Your doorbell is hidden under sink in the bedroom....what usually goes wrong with these is the button outside. Got mine at home depot, works like a charm....04 Dynasty!
×
×
  • Create New...