Jump to content

ktloah

Members
 View Profile  See their activity

  • Posts

    221

  • Joined

  • Last visited

 Content Type 

Everything posted by ktloah

  1. ktloah
    My 04 Dynasty lost its headlights and it was the J12 connector on the smart wheel controller. It's located in the panel below the drivers side. I replaced the connector with a 30 Amp relay bypassing the connector.
  2. ktloah
    Fill each filter with diesel and your good to go
  3. ktloah
    There is no adjustment screw on the filter. The bubbles are air. Like Ivan said, change out those o rings on the filter
  4. ktloah
    Keyless entry, look under passenger cup holder, there should be a momentary button. Essex Electric can tell you how to reset your system. Believe they are located in CA.
  5. ktloah
    Exactly what jdw said. You can pickone up anywhere that sells truck parts. No need for #'s...just tell them you need a maxi brake can...
  6. ktloah
    In my experience, post turbo is where my sensor was located and anything above 1200F was considered 🔥
  7. ktloah
    Thanks
  8. ktloah
    I have an ISL 400 in an 04 Dynasty. Is the valve in a relatively easy place to see which valve I have?
  9. ktloah
    You can remove the 6 bolts, clean the mating surfaces and apply a bead of silicone and reinstall...
  10. ktloah
    There is an awesome ALLISON shop in CRANSTON RI...right off of 95. NE Power Products. Great people too
  11. ktloah
    I for one never let my tank get below 1/2.... sounds to me like you have dirty filters...like others have said, change them first.
  12. ktloah
    Are you sure the bag is leaking? Could be the solenoids for travel mode on your leveling system
  13. ktloah
    That's awesome Rick, happy trails
  14. ktloah
    Tim is correct...you need to change the board in the A/C units...
  15. ktloah
    Check all the connections and clean any corrosion...good luck
  16. ktloah
    If your fuses are all good, I would next look at the smart wheel box. My 04 Dynasty lost the headlights and turned out to be a burnt wire where it.plugs into smart wheel box..good luck
  17. ktloah
    What kind of repairs did you have done?
  18. ktloah
    Thanks
  19. ktloah
    Hey Frank, have any issues when pressure washing the engine with electronics or sensors on engine?
  20. ktloah
    I think what they were asking was what one used to clean their engines....
  21. ktloah
    Do you lean on one side when in travel mode? My 04 Dynasty did, called HWH, talked to a tech who walked me thru diagnostics and turn out to be a bad solenoid on front manifold(on mine). Bought the parts, replaced my self. Just be sure to block up your frame...
  22. ktloah
    I am definitely interested in this thread!!
  23. ktloah
    I'll try it, thx
  24. ktloah
    Hey Frank, Jake switch is off...thanks anyway. Fuses are good also
  25. ktloah
    Ok guys, cruise was working fine but now the icon lights up on dash but it won't engage...anyone have this problem?
×
×
  • Create New...