Jump to content

ktloah

Members
 View Profile  See their activity

  • Posts

    223

  • Joined

  • Last visited

 Content Type 

Everything posted by ktloah

  1. ktloah
    I replaced mine on my 04 Dynasty from Source Engineering. Like Rob said, talk to Jim, He and his crew are ex- monaco guys. They do a great job!. Also replaced the 1 wire coolant level sensor..they make their own....
  2. ktloah
    I believe you can't have one on furnace and one on heat pump. Both units must be on the same
  3. ktloah
    Not sure if this will help, but Jim at SOURCE Engineering in Oregon is very knowledgeable on older Monaco's. He and his crew all worked at Monaco. He may be able to help. Good luck
  4. ktloah
    Call Jim @ Source Engineering in Oregon. He and his workers are all ex Monaco people. Great guys and very knowledgeable. He should be able to help you.
  5. ktloah
    Check the dip switches...sounds like the unit isn't communicating with the thermostat if you don't see it on the screen
  6. ktloah
    Thanks Chuck and everyone for your help. Was able to get #'s from what Chuck posted...Thanks again!!
  7. ktloah
    Thank you very much!!
  8. ktloah
    Awesome, I'll give it a try....thank you No joy on the vin #...thxs for the try
  9. ktloah
    Thanks for the great info...
  10. ktloah
    Hey Chuck, hose I'm thinking of is the return hose from radiator to the engine. Looks like rubber hose to the metal pipe back to metal hose back to rubber to engine. Thx for the reply
  11. ktloah
    So I'm going to be replacing my coolant in the spring and noticed a couple of rubber hoses to the radiator are questionable. Has anyone replaced these that would have z source or part # that they used? It sits on the roadmaster 10r chassis...I know I could probably remove the hose and possibly match it but would rather have it in hand before draining the system...
  12. ktloah
    My shop has a 60 gallon compressor...150psi...
  13. ktloah
    Not sure if this helps Paul, but mine was mounted in the same spot under the bedroom sink. Couldn't get it to work at all. Popped off the doorbell button and replaced it with a home-depot one and it works! Seems moisture gets in and shorts them out
  14. ktloah
    Talk to Jim @ Source Engineering...phone # 458-207-9442. He and his workers all worked at Monaco. He'll hook you up. I installed his home-made coolant sensor and it works flawlessly.. the tank bolts right up to the old holes. Take note of where your sensor is mounted..some are mounted low or high, left or right...good luck
  15. ktloah
    Source Engineering in Oregon has these sensors. My 04 Dynasty has the 1 wire probe and Jim hooked me up. He makes his own! Installed it in one of his new coolant expansion tanks and all is well
  16. ktloah
    The price alone keeps me away...
  17. ktloah
    I got mine believe it or not on Amazon...400 ISL
  18. ktloah
    Thanks, I'll give it a try
  19. ktloah
    thanks guys, I'll give it a try again when I get out of storage The switch in the bathroom is on but just blows cool air the switch is on, just blows cool air
  20. ktloah
    Thanks Dave, I have gently tapped on the pump to no avail. From what I read in the manual, the bedroom pump also supplies the bathroom!?
  21. ktloah
    Ok, here is my problem, we have an 04 Dynasty with the aquahot 100 system and everything works great except the bathroom register blows cool air...any ideas on where to look?
  22. ktloah
    I had a similar problem on my 04 Dynasty. It would lean to the passenger side while parked or while driving. I called HWH in Moscow Iowa and was able to talk with a tech who together for over an hour, walked through my system and we were able to diagnose the problem. Turned out it was the "travel" mode solenoid. Bought the parts thru them and installed them myself. Good luck
  23. ktloah
    Ours is an 04 Dynasty with the ISL 400. Just had an exhaust manifold replaced...do mostly my own work on it...no problems with it other than belts and idler pulley... 94K. mileage? Don't really care about it...in my opinion, you either run with the big dogs or you sit on the porch 😉
  24. ktloah
    I use the balance beads, never had a problem...running toyo 144's on an 04 Dynasty
  25. ktloah
    When you disassemble your mirrors, did you have to cut all the wires?
×
×
  • Create New...